Vesta Hydrogen: NEW Features = MORE Possibilities

Vesta Hydrogen:

NEW Features = MORE Possibilities

We’ve made some UPGRADES!  

With Hydrogen as your EAM mobile solution you can NOW:

  • Add Materials Component to Work Orders
  • View Functional Location/Equipment Bill of Materials on the Work Order and select Materials from it
  • Add/Update Items on Notifications
  • Enter Measurement Points on Work Orders, Operations, Equipment and Functional Locations
  • Utilize the Measurement Point Entry List Support
Yes. Tell me more!

…and what else you might ask? Check out our overview video:

What to know even more about Vesta Hydrogen? Read out our earliest post below:

Stamford, CT, October 11, 2016 – Vesta Partners, a global SAP EAM consulting firm, announces the releases of a new EAM Mobility Solution, called Vesta Hydrogen. The solution has been developed by Vesta, to unlock the full potential of any SAP EAM system by empowering the asset management end-users to work seamlessly in the field or in the office using the same adoptive interface.

artboard-7600w“We have seen a revolution in enterprise system user experience during the past few years. No longer is it sufficient to assume that users will engage with enterprise systems using monolithic interfaces that tie them to their desktop” stated Mike Maiolo, the CEO of Vesta. “That is why we are very excited to bring our customers an EAM mobility solution that allows asset management end-users to focus on the work itself, rather than the technology.”

Vesta Hydrogen has a modern, SAP Fiori-based UX that works on laptop, tablet and mobile devices (Windows PC, iOS & Android). The solution is fully functional offline to support field based work, and it has an easily configurable high-contrast theme for better use while outdoors. A simple role based configuration for maintenance tasks shows users only the information that is necessary to complete their work, improving field productivity and saving cost by eliminating custom coding. Structurally, the Hydrogen solution has a flexible and lightweight architecture that easily transitions into the SAP EAM landscape with minimal impact.

“Most importantly, Vesta Hydrogen is developed, supported and backed by Vestas SAP EAM industry experts… and EAM isn’t just something we do. It’s all that we do” states Rob Ericsson, Vice President Mobility & Usability.

productoverview1500

CLICK HERE TO LEARN MORE ABOUT HYDROGEN

Search All Categories:

Vesta Hydrogen: NEW Features = MORE Possibilities 2017-05-08T13:59:49+00:00

Vesta Launches Hydrogen, a Simple & Flexible EAM Mobility Solution

Vesta Launches Hydrogen, a Simple & Flexible EAM Mobility Solution.

Introducing: Vesta Hydrogen

Stamford, CT, October 11, 2016 – Vesta Partners, a global SAP EAM consulting firm, announces the releases of a new EAM Mobility Solution, called Vesta Hydrogen. The solution has been developed by Vesta, to unlock the full potential of any SAP EAM system by empowering the asset management end-users to work seamlessly in the field or in the office using the same adoptive interface.

artboard-7600w“We have seen a revolution in enterprise system user experience during the past few years. No longer is it sufficient to assume that users will engage with enterprise systems using monolithic interfaces that tie them to their desktop” stated Mike Maiolo, the CEO of Vesta. “That is why we are very excited to bring our customers an EAM mobility solution that allows asset management end-users to focus on the work itself, rather than the technology.”

Vesta Hydrogen has a modern, SAP Fiori-based UX that works on laptop, tablet and mobile devices (Windows PC, iOS & Android). The solution is fully functional offline to support field based work, and it has an easily configurable high-contrast theme for better use while outdoors. A simple role based configuration for maintenance tasks shows users only the information that is necessary to complete their work, improving field productivity and saving cost by eliminating custom coding. Structurally, the Hydrogen solution has a flexible and lightweight architecture that easily transitions into the SAP EAM landscape with minimal impact.

“Most importantly, Vesta Hydrogen is developed, supported and backed by Vestas SAP EAM industry experts… and EAM isn’t just something we do. It’s all that we do” states Rob Ericsson, Vice President Mobility & Usability.

productoverview1500

CLICK HERE TO LEARN MORE ABOUT HYDROGEN

About Vesta, a Rizing Company

Vesta Partners is a professional services firm focused on SAP EAM solutions for customers in asset intensive industries. As an SAP Services and Select Consulting Partner, Vesta’s approach combines industry best practices with practical technology solutions to help customers track, manage and report on capital asset usage.  In addition to its consulting services, Vesta offers proprietary software solutions addressing niche EAM demands.  With offices located in North America, Europe and Asia Pacific, Vesta’s real world experience and practical solutions deliver results that directly translate into efficiency improvements and real cost savings.

For more information, please contact: +1 203 517 0400 or email us at info@vestapartners.com.

Vesta Launches Hydrogen, a Simple & Flexible EAM Mobility Solution 2017-01-25T13:29:27+00:00

How to record Lab Standards in SAP using Vesta QMC

How to record Lab Standards in SAP using Vesta QMC

How to record Lab Standards in SAP using Vesta QMC

Have you ever been frustrated by the fact that you cannot record the Lab Standards used during calibration recording in SAP?

Recording calibration information in SAP is achieved by using features of SAP QM and SAP PM, but there is no support for the recording of Lab Standards.

Vesta QMC is an SAP add-on that not only enhances the calibration process in SAP, it also allows users to record all Lab Standards used, and run an audit report to identify where they were used.

Recording Lab Standards

In this section we will show how easy it is to record Lab Standards with Vesta QMC and then run the audit report to view where they were assigned to inspection lots.

The following steps assume you have already scheduled and released your maintenance plan, which will have created a work order and inspection lot.

Step 1:

Navigate to any of the calibration recording transactions (QE11, QE17, QE20, QE51N or QE72) and enter the appropriate selection criteria that will return the required inspection lot.

Step 2:

Click on the Record Lab Stn button.

QMC - blog - Step1

Step 3:

Start entering Standards that were used during the calibration process.

QMC - blog - step 3

As you enter Standards, you will notice that Vesta QMC indicates if the Standards themselves require calibration. If the red icon appears, it means the Standard has not been calibrated at all, or is passed the required next calibration date.

Last Calibration date and Calibration Due dates are displayed to the user as well.

In addition, you can enter environmental information in the form of the Lab Temperature and humidity.

Step 4:

Save the changes.

QMC - blog - step 4

That is all that needs to be done to record the Lab Standards that were used. These can then be reflected on the Calibration Certificate, which itself is created by Vesta QMC.

Lastly, we can run a report to determine during which calibrations the Standard was used. This could come in handy if for example it is determined later on that the Standard itself was faulty. All the pieces of equipment that were calibrated with the Standard can then easily be identified and the corrective action taken.

Lets have a look at how we can accomplish this:

We start by navigating to transaction /VESTA/QMC_TRACE  and enter the equipment number for the Standard.

QMC - blog - 5

Execute the transaction  QMC - blog - 6

QMC - Blog -7

The resulting information indicates among other thing, the Inspection Lot and Work Orders during which the Standard was used, as well as the equipment that was calibrated.

 

Stay tuned for additional blog posts on Vesta products.

About the Author:

Peter Mobert
Peter MobertDirector, Software Products
Mr. Mobert is Director of Software Products and is responsible for leading the software development team at Vesta. The software development team delivers software products that integrate with, and facilitate the use of, SAP EAM related activities. He has been working in software development and consulting since 2001 with expertise in systems integration, user experience, user interfaces, mobility and the cloud.

Search All Categories:

How to record Lab Standards in SAP using Vesta QMC 2017-01-25T13:29:39+00:00

WEBINAR: Getting the Most out of Calibration in SAP with Vesta QMC

WEBINAR: Getting the Most out of Calibration in SAP with Vesta QMC

Sign up Today and find out how you can achieve a more successful Tomorrow.

Spending Today complaining about Yesterday won’t make Tomorrow any better. Find out how you drastically cut down on waisted time in your SAP calibration process with Vesta QMC. Join our upcoming Live Webinar session on March 18th 9:00AM EST/3:00PM CET, hosted by Peter Mobert, Director, Software Products of Vesta.

Webinar Details:

Vesta QMC eliminates the repetitive steps of creating Master Inspection Characteristics and task lists required for calibration within your SAP platform. Instead, the solution introduces a new Master Data object called “Data Sheets”. Data Sheets can be assigned to single or multiple equipment in need of calibration, defining which sequence of readings are to be taken in addition to their Plausibility, Adjustment and Process limits.

Vesta QMC also allows for the capturing of which Standards were used during results recording, and the ability to audit this data through a traceability report provided with the solution.

Key Takeaways:

  • QMC streamlines the calibration process in SAP QM/PM
  • Audit log available for Standards used during results recording
  • Generate input/output requirements based on Linear calculations
  • Calibration Certificate available for each Inspection lot clearly outlining the readings and conditions during calibration
  • Guardbanding capabilities supported

Click here to register

About the Host:

Peter Mobert
Peter MobertDirector, Software Products
Mr. Mobert is Director of Software Products and is responsible for leading the software development team at Vesta. The software development team delivers software products that integrate with, and facilitate the use of, SAP EAM related activities. He has been working in software development and consulting since 2001 with expertise in systems integration, user experience, user interfaces, mobility and the cloud.

WEBINAR: Getting the Most out of Calibration in SAP with Vesta QMC 2017-01-25T13:29:39+00:00